Product overview
According to the European standard EN12527 design, "dynamic test", "long-distance walking test", "static load test" can be carried out, and it needs to be reversed, such as 5 meters in the forward direction, and then 5 meters in the reverse direction; It can also be equipped with casters; it can measure the temperature and use an infrared temperature sensor to detect the tire surface. Yuannao matches the temperature of the noodles every 1 minute; it can be determined that every 15 minutes, Yuanyan measures the temperature of the input surface and records it, and it will be published together with the report. A computer-controlled halberd watch that can run distance and temperature. There is a clock, so you can start the test at the time of the roll, and end the test in the roll (control the running time) (the screen displays the load and speed). German walking distance - the general fixed value of the mill should be 99999 kilometers. Keeping a device, the test will stop the Hanzi from damaging the soil by himself, and the device can be carefully measured and stopped by himself. In addition to the fact that the caster had stopped by itself, the left-hand Lu was equipped with the mud room where the soil was damaged by the man; in the tilt test, the angle between the caster and the roller reached 30 degrees by installing the clamp. Different test programs can be used to test the same wheel, and the program can be set by itself in the operation interface. During the test and stop process, the speed can be set as usual, such as increasing the speed by 10% after 15 minutes. Condensate barrier can be 5mm thick or 10mm thick. The height of the obstacle can be freely met and swung from 1mm to 25mm, and the angle of the obstacle is in line with the IS022878 standard and the oblique 45.
Test items
long-distance movement test, dynamic test, static load performance test, etc. The application of the load adopts the weight superimposed direct pressure type, which more realistically simulates its test environment and state;
Touch screen interface functions: a. Load weight, obstacle height, test result description, etc. are input on the computer interface; b. The test stroke value is set through the user interface of the touch screen and displayed in real time;
c. The linear speed of the drum is adjusted by the frequency converter, and the touch screen user interface is displayed in real time;
d. Parameters such as speed, number of collisions with obstacles, number of rotations, total running time, and total running distance are displayed by the touch screen to the user according to the actual situation.
e. After starting up and running, the caster will automatically stop when the caster travels to the specified stroke value. After stopping, the tester can instruct to print out the test report; f. When the caster is damaged, the testing machine will automatically alarm and stop.
Product Parameters
Product Show
Audited Supplier 
){kind=link}
){kind=link}