The SUPER-2 vibration controller is a product of the American Vicon Technology Company. It is designed with an internationally advanced distributed system architecture. Its core uses TI's latest TMS320 series 32-bit floating point high-speed processor.
The system uses low noise design techniques, floating point digital filtering and a 24-bit resolution ADC/DAC. The vibration control uses an adaptive control algorithm to improve the technical performance of the vibration control system to a new level. The SUPER vibration controller has the follo
1 High performance and price ratio and reliability
The hardware adopts modular and low-noise design technology.
The hardware circuit of the system realizesclosed-loop control is placed in the control box, independent of the computer.
The front-end control box uses USB2.0 interface to communicate with the PC.
2. Perfect automatic safety detection and protection function, high test safety
The system is equipped with: system parameter setting protection, vibration table limit value limit protection, control spectrum interrupt protection, control spectrum interrupt protection, control spectrum alarm protection, control spectrum alarm protection, manual emergency interrupt, pre-test protection, control channel RMS protection, self-test maximum output voltage protection, maximum output voltage protection, continuous safety detection, overload check, interrupt tolerance check, RMS check, etc. run.Product Parameter
|Number of channels:||4-channel sync input|
|Channel setting||Channel type, range (0.1V, 1V, 10V), sensor type, sensor sensitivity, coupling mode (differential AC, differential DC, single-ended AC, single-ended DC)|
|Resolution||24-bit analog-to-digital conversion (ADC)|
|Input mode|| Built-in charge amplifier and ICP constant current source, voltage, ICP accelerometer, charge accelerometer can be directly connected|After sales service
|Random thrust||650kgf rms|
|Allowable eccentric torque||>2450N.m|
|Maximum load||350kg (plus auxiliary support |
The supplier is obliged to provide technical support and after-sales service during the operation period after the end of the equipment warranty period. In the process of putting the equipment into use, if there is any failure, the supplier will ensure that it responds within 8 hours after receiving the notice that the user needs to repair, and rush to the equipment site for repair within 48 hours.
This program does not represent our final result, we will provide better services according to your needs. We sincerely welcome your further communication with us so that we can provide you with better service.