| Customization: | Available |
|---|---|
| After-sales Service: | Lifetime Maintenance |
| Power Supply: | 220V |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
How to use:
After the battery is fully charged according to the test method of 4.5.1 specifications, install the battery on the surface of the platform, and place a metal rod with a diameter of 1.58mm±0.2mm horizontally on the upper surface of the geometric center of the battery. A weight with a mass of 9.1kg±0.1kg is used to hit the surface of the batterywith a metal rod from a height of 610mm±25mm in free fall and observe it for 6h.
| Falling weight | 9.1kg±0.46kg (20±1 lb) and 10kg |
| Impact height | 610 mm and 1000mm (The limit can be adjusted freely) The maximum test height is 1000mm |
| Height display | Through the altimeter display, accurate ±5mm |
| Impact mode | The falling ball is lifted to a certain height and released. The falling ball falls freely in the vertical direction without tilting or shaking |
| Horizontal bar | 15.8±0.2m(5/8 in) steel bar |
| Interior material | SUS #201 stainless steel plate, 1/3 of the place with iron fluorine adhesive tape, high temperature resistance, corrosion resistance, insulation easy to clean |
| Outer box material | Cold-rolled plate paint treatment, thickness of 1.5mm |
| Air vent | It is located on the back of the box, with a diameter of 100mm and an external diameter of 110mm exhaust duct, which is convenient for external high-power exhaust fan in the laboratory |
| The maximum battery size can be measured | 250*250*250mm |
| Box door | Single door, toughened glass observation window on the door, cold handle door lock, box door with silicone foam pressing strip |
| Upper and lower impact surface | 45# steel paint treatment; Thickness 15mm |
| Protective device | Upper and lower limit protection switch, safety stop, located at the bottom of the weight, to protect in case of sudden power failure |
| Lighting installation | Easy to observe the state of the test |
| Visual window | 250mm*250mm |
| Use power supply | 1∮, AC220V, 3A |
| Power supply | 700W |
| Weight (approx) | About 150kg |
| Volume product (approx) | 700x800x1650mm (Length x width x height) |
){kind=link}