Hong Jin New Energy Lithium Batterie High Altitude Low Pressure Simulation Test Altitude Chamber

• After-sales Service: Lifetime Maintenance
• Power Supply: 220V
• Certification: CE, ISO
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HJ-66
• Inner Box Material: SUS201# Stainless Steel, Thickness 3mm
• Outer Box Material: A3 Cold Plate Baking Varnish, Thickness 1.5mm
• Inner Box Size(Wxdxh): 400X400X400(mm) / Can Be Customation
• Storage Partition Material: Stainless Stee
• Transport Package: Fumigation-Free Standard Export Wooden Box
• Trademark: Hongjin
• Origin: China
• Production Capacity: 1000 Sets/ Month

Product Description

Product description
The battery high-altitude low-voltage simulation test chamber is designed for the test requirements of UL, EN, IEC and other standards. It can reach the low-pressure storage state of the sample in a short time, and can automatically control the test cycle, monitor the pressure change in the box throughout the process, and realize the automatic termination of the test. The simulated battery and battery pack are qualified if they are stored for 6 hours at a pressure equal to or below 11.6kPa and at an ambient temperature of (20±5) ºC, if the battery has no leakage, no exhaust, no disintegration, no rupture and no fire, and if the open circuit voltage of each experimental battery or battery pack after the test is not less than 90% of its voltage before the simulation experiment.

Meet the standard
GB/T 31485-2015 "Safety requirements and test methods for power batteries for electric vehicles" GB/T 31241-2014 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products" UN38.3 "United Nations Manual of Tests and Standards for the Transport of Dangerous Goods" IEC62133 "Batteries composed of batteries (Group) and safety requirements for use in portable Equipment UL 1642:2012 Standard for Lithium Batteries UL 2054:2012 Domestic and Commercial Battery Packs IEC 62281:2004 Safety Requirements for Lithium primary Batteries and accumulators in Transport.

Product parameters

Material of the inner box:	SUS201# Stainless Steel, Thickness 3mm;
Material of outer box:	A3 cold plate baking paint, thickness 1.5mm;
Pressure range:	0.5~100Kpa, commonly used test pressure 11.6Kpa;
Inner box size:	W500xH500xD500mm
Outer box size:	W650xH1300xD650
Material of storage partition:	Stainless steel;
Vacuum degree display:	Digital display vacuum meter control, accurate display vacuum degree, easy to set vacuum degree;
Timer:	LED digital display, can be set freely within 0-9999H (H/M/S seconds can be switched);
Pressure fluctuation:	≤5%
Power supply for equipment:	AC220V, 50HZ, 2.2KW;
When used, the temperature in the laboratory must be controlled to reach (20ºC+5ºC) before the temperature requirements in the test box can be reached.