Product Description
Product Usage
The Salt Water Spray Testing Machine Is Designed To Test The Corrosion Resistance Of Various Materials After Surface Treatment, Including Paint, Electroplating, Organic And Inorganic Films, Anodic Treatment, Anti-Rust Oil And Other Anti-Corrosion Treatments.
Features
1. Due To The Use Of The New Intelligent Salt Spray Tester, The Printed Circuit Board Is Used To Solve The Problem That The Relay Circuit Of The Old Salt Spray Tester Is Prone To Line Failure.
2. The Temperature Sensor Adopts The Original Digital Sensor Chip Imported From Japan. It Will Not Decay After Ten Years Of Use. The Old Models Mostly Use Pt-100 And K Type. With The Extension Of The Service Life, Most Of The Sensors Will Be Inaccurate. If No Calibration Is Adopted If So, It Will Cause Great Harm To The Test.
3. The New Salt Spray Test Machine Integrates Programmable, Continuous/Interval Spray, Manual/Automatic Modes. Under The Collection Of This Variety Of Modes, It Can Basically Meet All The Current Standards For Salt Spray Testing Machines, So That Customers Do Not Have To Worry About The Selection Of Salt Spray Testing Machines
Standard
1. Gb/T 2423.17-1993 Salt Spray Test
2. Gb/T2423.18-2000 Salt Spray Test
3. Gb/T 10125-1997 Salt Spray Test
4. Astm.B117-97 Salt Spray Test
5. Jish8502 Salt Spray Test
6. Iec68-2-11 Salt Spray Test
7. Iec68-2-52 1996 Salt Spray Test
8. Gb.10587-89 Salt Spray Test
9. Cns.4158 Salt Spray Test
10. Cns.4159Cass Accelerated Copper Acetate Salt Spray Test
11. Gb/T 12967.3-91 Cass Accelerated Copper Acetate Salt Spray Test
Product Parameters
Model |
HJ-60 |
HJ-90 |
HJ-120 |
HJ-160 |
HJ-200 |
Chamber size in test chamber WxDxH(cm) |
60x45x40 |
90x60x50 |
120x100x50 |
160x100x50 |
200x100x60 |
Test outdoor box size WxDxH(cm) |
107x60x118 |
141x88x128 |
190x110x140 |
230x130x140 |
270x150x150 |
Laboratory temperature |
Salt water test method (NSS ACSS) 35ºC ± 1ºC/ Corrosion resistance test method (CASS) 50ºC±1ºC |
Pressure barrel temperature |
Salt water test method (NSS ACSS) 47ºC ± 1ºC/Corrosion resistance test method (CASS) 63ºC+1ºC |
Brine temperature |
35ºC±1ºC 50ºC±1ºC |
Salt water tank capacity |
15L 25L 40L 40L 40 |
Brine concentration |
Add 0.26 g of copper chloride (CuCI2 2H2O) per F liter of 5% concentration of yue chloride solution or 5% concentration of vaporized copper solution |
Compressed air pressure |
1.00±0.01kgf/cm2 |
Spray volume |
1.0~2.0ml/80cm2/h (collect at least 16 hours, take the average value) The relative humidity of the laboratory is above 85% |
Laboratory capacity |
108L 270L 480L 800L 1440L |
Product Show
![Industrial Applications Environmental Test Equipment Corrosion Resistant Salt Test Chamber](//www.micstatic.com/athena/img/transparent.png)
![Industrial Applications Environmental Test Equipment Corrosion Resistant Salt Test Chamber](//www.micstatic.com/athena/img/transparent.png)
![Industrial Applications Environmental Test Equipment Corrosion Resistant Salt Test Chamber](//www.micstatic.com/athena/img/transparent.png)
![Industrial Applications Environmental Test Equipment Corrosion Resistant Salt Test Chamber](//www.micstatic.com/athena/img/transparent.png)
![Industrial Applications Environmental Test Equipment Corrosion Resistant Salt Test Chamber](//www.micstatic.com/athena/img/transparent.png)
![Industrial Applications Environmental Test Equipment Corrosion Resistant Salt Test Chamber](//www.micstatic.com/athena/img/transparent.png)
![Industrial Applications Environmental Test Equipment Corrosion Resistant Salt Test Chamber](//www.micstatic.com/athena/img/transparent.png)
![Industrial Applications Environmental Test Equipment Corrosion Resistant Salt Test Chamber](//www.micstatic.com/athena/img/transparent.png)
![Industrial Applications Environmental Test Equipment Corrosion Resistant Salt Test Chamber](//www.micstatic.com/athena/img/transparent.png)