Hj-6 ASTM B117 Continuous Spraying Salt Spray Fog Corrosion Test Chamber

• Customization: Available
• After-sales Service: Lifetime Maintenance
• Warranty: 1 Year
• Model NO.: HJ-6
• Display: Digital
• Weight: 0-100Kg
• Power Source: AC220V
• Salt Water Tank Capacity: 15L 25L 40L
• Chamber Size in Test Chamber Wxdxh(Cm): 60X45X40(Customizable)
• Product Name: Fog Spray Corrosion Tester Cabinet
• Air Pressure: 86~ 106kpa
• Spray Method: Continuous Spraying
• pH: 6.5~7.2 3.0~3.2
• The Spraying Volume: 1.0~2.0ml/80cm2/H
• Spray Volume: 1.0~2.0ml/80cm2/H
• Transport Package: Fumigation-Free Standard Export Wooden Box
• Trademark: Hongjin
• Origin: China
• Production Capacity: 1000 Sets/ Month

Product Description

Product Usage     
The salt spray test chamber is a climate simulation device that tests the corrosion of electronic equipment, metallic material, as well as some surface treatment--coating, galvanizing, organic/inorganic coating, anodizing treatment, rust-proof oil coating, etc. Performance indicators in line with requirements of GB / T5170.8 Electrical and Electronic Products, Environmental Testing Equipment, the Basic Parameters of the Test Method. The salt spray corrosion test chamber according to GB / T2423.17 Electronic and Electrical Products Basic Environmental Test Procedures Test: Salt Spray Test Method for neutral salt spray test can also be used for acetic acid salt test.

Features     
1. The use of the new intelligent salt spray test machine and the printed circuit board solves the problem that the relay circuit of the old salt spray test machine is prone to line failure.
2. The temperature sensor uses the original Japanese imported digital sensor chip, which will not decay after ten years of use. The old models mostly use PT-100 and K type. With the extension of the service life, most of the sensors will be inaccurate. If calibration is not used If it does, it will cause great harm to the test.
3. The new salt spray testing machine integrates programmable, continuous/interval spray, manual/automatic mode. With this collection of multiple modes, it can basically meet all current standards for salt spray testing machines, so that customers don't have to worry about the selection of salt spray testing machines.

Salt spray test chamber standard     
1. GB/T 2423.17-1993 salt spray test
2. GB/T2423.18-2000 salt spray test
3. GB/T 10125-1997 salt spray test
4. ASTM.B117-97 salt spray test
5. JISH8502 salt spray test
6. IEC68-2-11 salt spray test
7. IEC68-2-52 1996 salt spray test
8. GB.10587-89 salt spray test
9. CNS.4158 salt spray test
10. CNS.4159CASS accelerated copper acetate salt spray test
11. GB/T 12967.3-91 CASS accelerated copper acetate salt spray test
 

Model	HJ-60	HJ-90	HJ-120	HJ-160	HJ-200
Chamber size in test chamber  WxDxH(cm)(customizable)	60x45x40	90x60x50	120x100x50	160x100x50	200x100x60
Test outdoor box size  WxDxH(cm)(customizable)	107x60x118	141x88x128	190x110x140	230x130x140	270x150x150
Laboratory temperature	Salt water test method (NSS ACSS) 35ºC ± 1ºC/  Corrosion resistance test method (CASS) 50ºC±1ºC
Pressure barrel temperature	Salt water test method (NSS ACSS) 47ºC ± 1ºC/ Corrosion resistance test method (CASS) 63ºC+1ºC
Brine temperature	35ºC±1ºC      50ºC±1ºC
Salt water tank capacity	15L 25L 40L
Brine concentration	Add 0.26 g of copper chloride (CuCI2 2H2O) per F liter of 5% concentration  of yue chloride solution or 5% concentration of vaporized copper solution
Compressed air pressure	1.00±0.01kgf/cm2
Spray volume	1.0~2.0ml/80cm2/h (collect at least 16 hours, take the average value)  The relative humidity of the laboratory is above 85%
Laboratory capacity	108L 270L 480L 800L 1440L