Product Usage
Precision CNC hydraulic press is a multi-function hydraulic press. The equipment is controlled by microcomputer processor in the whole process of digitalization and full closed-loop. The hardware adopts imported hydraulic control valves with high precision and high response speed. The equipment has two control modes of position and pressure, and the control accuracy is greatly improved by dozens of times compared with the conventional hydraulic equipment, and the multi-stage speed flexible pressing process. At the same time, it has the interference fit detection function of online detection of product pressing process, and automatically generates the pressing curve. Automatically generate production reports; The data tracing and preservation system with hundreds of thousands of sets of data storage greatly ensures the deep traceability of product online press assembly data. The equipment is widely used in automotive parts, shock absorbers, bearings, bushings, electronics, hardware and other products.
Working principle:
The hydraulic motor drives the oil pump cylinder for up and down pressing operation, and the electronic control system is controlled by PLC drive. It can set the pressing parameters of the products to be pressed on the touch screen of the equipment, which can effectively and accurately control the accuracy of the pressing parameters of the equipment. The pressure display accuracy of the equipment is 1%, the displacement control accuracy is within ±5mm, and the maximum output of the equipment is 1-10 tons 0 tons optional, the maximum stroke 200mm800mm can be arbitrary collocation.
Product features:
1. The overall force measurement accuracy of the equipment is 0.05% of the full scale, and the display unit is 0.01KN;
2. The AD sampling speed of the system for the force sensor is 300 times/second;
3. The small display unit of the displacement sensor is 0.01MM, and the error is 0.015% of the full scale. Repeated positioning accuracy is less than 0.03MM;
4, the parallel accuracy of the upper table and the lower table surface is within 0.10MM;
5. After the combination of rack and workbench, the rigidity at the opening of the equipment is not less than 200KN/MM;
6. The temperature rise of the equipment shall not exceed 20ºC for 24 hours continuous operation. When the ambient temperature is 40 ° C, the oil temperature will not exceed 65 ° C.
Product parameters:
| Equipment structure |
C type structure, guide sleeve using linear bearing |
| Installation method of force sensor |
Diving upper table |
| Dimensions of equipment working surface |
Lower table 600*450 (front * side) |
| Upper table size |
400*300 (front * side) |
| Working height of upper workbench and lower workbench |
500MM, the small is 100, the cylinder stroke is 400 (all action stroke) |
| Equipment dimensions |
Front 770* Side 1440* Height 2450 |
){kind=link}