Scope of application
This machine is suitable for use in reclaimed rubber factories, transmission belt factories, conveyor belt factories, rubber products factories, shoe factories, etc.
Cable factories, hose factories, seals and other rubber-related industries. This machine mainly consists of an integrated base, a frame, a front
Rear roller, transmission gear, reducer, distance adjustment device, roller temperature adjustment device, safety switch, electrical control
system composition. The roller material is alloy chilled cast iron, which has high hardness and wear resistance. The roller temperature is adjustable.
Setting, steam or cooling water can be introduced into the roller to adjust the roller temperature to meet process requirements.
Structure introduction
1. This machine mainly consists of an integrated machine base, frame, roller, transmission gear and gear reduction, motor, etc. Parts composition. The roller is made of chilled cast iron. The surface of the workpiece is ground and has high hardness and wear resistance. The inside of the roller is hollow and filled with water and drainage system. The machine is a desktop structure that reduces the worm gear The machine is installed next to the machine base, and the rollers and frame are placed on the upper part of the machine, making it compact in structure and easy to operate.convenient.
2. The transmission part of the machine is driven by a hard-tooth surface reducer motor located outside the machine base.The wheel drives the rear roller to rotate, and then drives the front roller to rotate through a pair of speed ratio gears installed on the left end of the roller.The front and rear rollers rotate in opposite directions at different speeds.
3. The transmission gears are all equipped with closed protection devices, and the machine is equipped with an electrical braking device in case of emergency stop., press the emergency stop switch to brake immediately, and the safety performance is more reliable.This machine is designed and manufactured by our company. Mainly used for mixing equipment of silicone and rubber, with precise structure Consistent, safe and convenient, wide applicability and high efficiency.
Equipment advantages
1. Easy to carry: The bottom space is designed to facilitate forklift transportation.
2. Integrated numerical control: The power switch and stop switch are integrated together for easy use.
3. Safety devices: multiple touch-type emergency stops, as well as hand-operated safety levers, designed with touch-type The emergency stop and reversal lever can be touched to reverse immediately in order to prevent employees from being accidentally brought in by the stick while working.
4. Chrome-plated cylinder: The material of the silver cylinder is high-strength stainless steel, which has been quenched, cylindrically ground, hard chromium electroplated, and cylindrically polished.Grinding-mirror polishing treatment makes it not easy to stick to materials, not easy to delaminate, not easy to deform and not easy to rust.
5. Install a rotary joint to circulate cold water and achieve good cooling effect.
6. Stainless steel tray, not easy to rust and easy to clean.
Product parameter
| Equipment model: |
HJ-230 |
Roller diameter: |
230mm/9in |
|
| Roll surface width: |
700mm |
Roller spacing: |
1mm-12mm |
|
| Spacing display: |
Mechanical dial |
Roller speed ratio: |
1;1.25 |
|
| Safety device: |
Contact emergency stopper |
Number of safety devices: |
multiple |
|
| Front roller line speed: |
13r/min |
Mixing capacity: |
15-20kg |
|
| Receiving device: |
SUS304 stainless steel tray |
|
| Special Features: |
Emergency stop with brake reversal function |
|
| Roll temperature: |
Water cooling/electric heating (either one is quoted) |
|
| Roller temperature control routine: |
1.5ºC-3.5ºC/ room temperature -200ºC |
|
| Temperature controller: |
Intelligent digital display |
Motor power: |
11KW |
|
| Bearing situation: |
Double front plain bearings |
|
| Reducer box: |
Hard gear face precision reducer |
|
| Power supply voltage: |
3$AC380V 40A |
Machine weight: |
≈2000-2500kg |
|
| Machine size: |
≈2500*1000*1450mm |
|
Audited Supplier 
){kind=link}
){kind=link}