Product Description
Scope of application:
Salt water spray testing machine is designed to test the corrosion resistance of its products after surface treatment of various materials, including coating, electroplating, organic and inorganic skin film, anodic treatment, anti-rust oil and other anti-corrosion treatment.
Product features:
1, due to the use of the new intelligent salt spray testing machine using a printed circuit board to solve the old salt spray testing machine relay circuit prone to line failure.
2, the temperature sensor adopts the original digital sensor chip imported from Japan, the use of ten years will not produce decay, the old model mostly uses PT-100 and K type, with the extension of service life, most of the sensors will not be allowed. If calibration is not used, it will cause great harm to the test.
3. The new salt spray testing machine integrates programmable, continuous/interval spray, manual/automatic mode. Under this collection of multiple modes, all the standards for salt spray testing machines can be basically met, so that customers do not have to worry about the selection of salt spray testing machines.
Applicable standards:
1, GB/T 2423.17-1993 salt spray test
2, GB/T2423.18-2000 salt spray test
3, GB/T 10125-1997 salt spray test
4. ASTM.B117-97 salt spray test
5. JISH8502 salt spray test
6, IEC68-2-11 salt spray test
7, IEC68-2-52 1996 salt spray test
8, GB.10587-89 salt spray test
9. CNS.4158 salt spray test
10. CNS.4159CASS accelerated copper acetate salt spray test
11. GB/T 12967.3-91 CASS accelerated copper acetate salt spray test
Product parameters:
| Model |
HJ-60 |
HJ-90 |
HJ-120 |
HJ-160 |
HJ-200 |
| Chamber size in test chamber WxDxH(cm) |
60x45x40 |
90x60x50 |
120x100x50 |
160x100x50 |
200x100x60 |
| Test outdoor box size WxDxH(cm) |
107x60x118 |
141x88x128 |
190x110x140 |
230x130x140 |
270x150x150 |
| Laboratory temperature |
Salt water test method (NSS ACSS) 35ºC ± 1ºC/ Corrosion resistance test method (CASS) 50ºC±1ºC |
| Pressure barrel temperature |
Salt water test method (NSS ACSS) 47ºC ± 1ºC/Corrosion resistance test method (CASS) 63ºC+1ºC |
| Brine temperature |
35ºC±1ºC 50ºC±1ºC |
| Salt water tank capacity |
15L 25L 40L 40L 40 |
| Brine concentration |
Add 0.26 g of copper chloride (CuCI2 2H2O) per F liter of 5% concentration of yue chloride solution or 5% concentration of vaporized copper solution |
| Compressed air pressure |
1.00±0.01kgf/cm2 |
| Spray volume |
1.0~2.0ml/80cm2/h (collect at least 16 hours, take the average value) The relative humidity of the laboratory is above 85% |
| Laboratory capacity |
108L 270L 480L 800L 1440L |
Audited Supplier 
){kind=link}
){kind=link}