Scope of application:
Cantilever beam impact testing machine is used to measure the impact toughness of plastic, reinforced nylon, glass steel, ceramics, cast stone, plastic electrical appliances, insulating materials and other non-metallic materials. It is a commonly used equipment for quality inspection in scientific research institutions, colleges and universities and non-metallic material manufacturers. This machine is an instrument with simple structure, convenient operation and high test accuracy. The product shall meet the requirements of ISO179-- 92, GB1043-93 standard. Electronic impact testing machine adopts circular grating Angle measurement technology, with high accuracy, good stability and large measuring range, digital measurement impact strength, pre-elevation Angle, Angle of rise, and average value, energy loss automatic correction, print test report and other functions.
Product features:
1. High precision intelligent controller, and equipped with liquid crystal display, can intuitively and accurately read data;
2, in the impact direction, improve the rigidity of the material, and the impact mass is concentrated on the center of mass of the pendulum, truly do no vibration impact test, and the service life growth;
3. Adopt imported high resolution digital encoder, the Angle test accuracy is higher and more stable;
4. In line with the aerodynamic principle of impact hammer and imported ball bearings, greatly reduce the friction loss brought by machinery; 5. Automatic calculation of final results, test data can save 12 groups of data and calculate the average;
6. Cantilever impact testing machine can choose the operation interface IN Chinese and English, the test results can choose J/M,KJ/ CM, KG-CM/ cm,FT-IB/IN and other units;
7. Built-in micro printer prints test data.
Product parameters:
| Model number |
HJ-5.5D |
HJ-22D |
| Impact velocity |
3.5M/S |
| Pendulum energy |
1J, 2.75J, 5.5J |
11J, 22J |
| Pendulum torque |
1J PL=0.5155N.M
2.75J PL=1.4177N.M
5.5J PD5.5-2.8355N.M |
11J PD11=5.6711N.M
22J PD22=11.3419N.M |
| The pendulum raises the Angle |
150° |
| Distance from center of pendulum to impact blade |
(STRIKE CENTER AVSTAND) 335MM |
| Measurement accuracy |
±0,1 % |
| resolution |
0.10% |
| Impact blade to the upper plane of the pliers |
22 MM±0,2 MM |
| Radius of blade fillet |
R = 0,8 MM±0,2 MM |
| Output mode |
Utskriften |
| Supply voltage |
220V 50HZ |
| Appearance size (length * width * height) |
85CM*35CM*69CM |
Audited Supplier 
){kind=link}
){kind=link}