Product Introduction:
Headphone rotary plug and pull testing machine, used for mobile phone headphone, USB and computer peripheral connectors and other products for insertion and pull out test. Life testing of product connections to assess product durability. The mobile phone headphone insertion and withdrawal testing machine can analyze the insertion and withdrawal output curve analysis, and the Angle insertion and withdrawal test set by the corner.
Equipment features:
1. The headphone rotary plug and pull testing machine is a device to test the reliability of the headphone port and headphone.
2. The structure is reasonable and unique, and it has full applicability to different models of mobile phones.
3. The test process of earphone insertion, rotation, and re-insertion can be achieved to avoid unilateral wear.
4. The holding part of the headset can float slightly, which can completely simulate the manual insertion and removal of the headset, and avoid the wear caused by the headset and the jack.
5. Stable operation, low noise, maintenance-free.
two, Test purpose
1. The durability of the headphone jack.
2. Reliability of headphones.
Three,Test procedure description
The operation of the headset plug inserting and pulling out was tested when the user was simulated.
The earphone plug is inserted into the mobile phone → the mobile phone is fixed in the adjustable fixture → the earphone is fixed in the fixture of the inserting mechanism → The pneumatic slide table drives the earphone plug to pull out → The rotating motor drives the earphone plug to rotate axial at any Angle or at a specified Angle (±180°) → The pneumatic slide table drives the earphone plug to insert again, and the next working cycle continues.
Product parameters:
| Number of workstations |
1/set |
| Operation method |
Touch screen |
| Action actuator |
SMC pneumatic slide table, stepper motor |
| Insertion frequency (motion beat) |
1~60 times/min (adjustable) |
| Counter |
6 bits (built-in) |
| Voltage |
220V |
| Power |
100W |
| Air pressure |
0.4~0.6Mpa |
| Dimensions |
600MM*550MM*550MM |
| Weight |
35KG |
){kind=link}