Test purposes
This testing machine is mainly used for overcharge and overdischarge of the battery. During the charge and discharge test, the battery is placed in an explosion-proof box and an external charge and discharge tester is used to protect the operator and the instrument. The test box of this machine can be tested according to the test requirements. Make customized.
Applicable Standard
GB 31241-2014 "Safety Requirements for Lithium-ion Cells and Battery Packs for Portable Electronic Products"
GB/T 18287-2013 "General Specification for Lithium-ion Batteries for Cell Phones" External Short-Circuit Requirements
UN38.3(2012) Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria, Part III
IEC62133-2012 "Safety requirements for accumulators and accumulators containing alkaline or non-acid electrolytes"
IEC 62281: 2006 "Safety Requirements for Lithium Primary Cells and Accumulators in Transport"
IEC 60086: 2007 "Primary Battery Part 6 Safety Requirements for Lithium Batteries"
Installation requirements
1. Ambient temperature 25±5ºC;
2. Relative humidity 45-85%RH;
3. Atmospheric pressure 86~106KPa;
4. No direct sunlight or direct radiation from other heat sources;
5. There is no strong vibration around;
Product Parameters
| Test box size per layer |
500*500*500mm (length*width*height); (can also be customized according to customer requirements) |
| Outer box material |
1.5mm thick A3 steel plate and treated with baking paint, |
| Inner box material |
SUS#201 Thickness 1.2mm |
| Single door, left open, the inner box door is made of stainless steel, and has a silicone pressure strip, and there is an observation window on the door |
| The door is connected to the box by a strong hinge, and the door is locked with an explosion-proof cold handle |
| The inside of the test box is affixed with Teflon tape, which is effectively insulated and flame retardant, and is easy to clean. |
| On the right side of each layer of the box, there is a circular wire installation port, which is convenient for the test connection wire to pass through. |
| There is a separate test panel to control the lighting and exhaust in each test chamber |
Product Show
){kind=link}