One summarize
1. Mobile phone wire bending tester A device for testing the bending resistance of mobile phone wire.
2. The structure design is reasonable and unique, and it has full applicability to different types of mobile phone wires.
3. Stable operation, low noise, maintenance-free.
Two Test purpose
1. Bending resistance of wire.
2. The influence of bending on the wire.
Three. Test procedure description
The test is carried out by simulating the bending action of the conductor in the process of user use.
The two ends of the wire are fixed in the clamping block on both sides of the clamping part → both cylinders are pushed out at the same time to achieve the bending action of the wire → both cylinders are withdrawn at the same time to complete the action of the wire release.
Four. Function realization
1. The cylinder realizes the action; PLC control.
2. Large touch screen interface control.
3. Manual, automatic switch.
Product parameters
| Number of workstations |
1/set |
| Operation method |
Touch screen |
| Action actuator |
SMC cylinder |
| Test Pinch Spacing |
25mm (adjustable) |
| Bending frequency (beat) |
1~40 times/min (adjustable) |
| Counter |
6 bits (built-in) |
| Voltage |
220V; |
| Power |
100W |
| Air pressure |
2~6Mpa |
| Dimensions |
480MM×480MM×350MM |
| Weight |
40kg |
Audited Supplier 
){kind=link}
){kind=link}