Scope of application
Simulation grip Tester (Touch screen model) The test machine is used to simulate the impact of the clamping force of the two splints on the package and the goods when the clamping car is loading and unloading the package, and to evaluate the clamping strength of the package. It is suitable for the finished product packaging of kitchenware, furniture, household appliances, toys and so on, especially for the anti-clamping strength test of the package as required by SEARS. It is suitable for testing the deformation of product packaging under horizontal pressure in the process of transportation or storage and the protection ability of packaging to the products in the package, so as to improve the packaging design. According to ASTM D6055, American SEARS, or customized according to customer non-standard requirements.
Product parameters
| Lifting sample weight |
Within 0-600KG (parallelepiped transport package) |
| Liquid crystal display |
The screen shows the large clamping force value, holding time, displacement, number |
| Force accuracy |
National standard level 1.6 |
| Sensor accuracy |
1/20000, measuring accuracy 0.5%; |
| The splint is shifted upward |
0-1000mm(according to customer requirements) displacement precision to the standard |
| Splint left and right travel displacement |
0-1200mm (can be determined according to customer requirements) |
| Size of clamping plate |
1220*1220mm(according to customer requirements) |
| Clamping experimental speed |
Up and down 600mm/min; About 1-500mm/min(adjustable) |
| Unit of force |
Kgf/N/Lbf |
| Transmission mode |
servomotor |
| Protective device |
Leakage protection, travel limit device, overload protection, over voltage protection, power protection, emergency stop device |
| Splint force sensor |
Four (More efficient and sensitive induction gripper transmission power) |
| Platform splint |
The thickness of the splint shall not be less than 20mm to ensure that the clamping plate is in the clamping state (< 2000KG) no deformation, between the two splints are parallel, and the bottom plate is vertical, and the use of high quality non-slip rubber pad, to ensure that the packaging sample in the test process is not easy to slip and damage. |
| Machine size |
2650*1900*2120mm |
| voltage |
AC220V/50HZ |
Audited Supplier 
){kind=link}
){kind=link}